Inconel 625 Round Bar Weight Calculator

Inconel 625 Round Bar Weight Calculator

Here’s a comprehensive table with key information about Inconel 625 Round Bar weight:

PropertyValue
Density8.44 g/cm³ (0.305 lb/in³)
Weight Calculation FormulaDiameter (mm)² x 0.004143 = Weight in lbs
Weight per Unit Length (1-inch diameter)2.17 lbs/ft (3.23 kg/m)
Specific Gravity8.44
Temperature EffectWeight remains constant; volume may change slightly with temperature
Standard LengthsTypically 10-20 feet (3-6 meters)
Diameter Range1/4 inch (6.35 mm) to 12 inches (304.8 mm)
Surface FinishAs-rolled or machined
ASTM SpecificationASTM B446
Typical ApplicationsAerospace, marine, chemical processing

Additional Information

Composition: Inconel 625 is primarily composed of nickel (58-71%), chromium (20-23%), and molybdenum (8-10%), with smaller amounts of iron, niobium, and other elements.Mechanical Properties:

  • Tensile Strength: 120-150 ksi (827-1034 MPa)
  • Yield Strength: 60-95 ksi (414-655 MPa)
  • Elongation: 30-60%

Heat Treatment: Inconel 625 round bars are typically supplied in the solution annealed condition, heat treated at 1875°F (1024°C) and rapidly cooled.

Corrosion Resistance: Excellent resistance to a wide range of corrosive environments, making it suitable for marine and chemical processing applications.

When ordering Inconel 625 round bars, it’s important to specify the desired diameter, length, and any special requirements for surface finish or heat treatment to ensure you receive the correct product for your application.

Leave a Comment