MS Bright Bar Weight Calculator
Here’s a comprehensive overview of MS Bright Bar weights, including a weight table and key information:
MS Bright Bar Weight Table
| Diameter (mm) | Weight (kg/m) |
|---|---|
| 6 | 0.22 |
| 8 | 0.39 |
| 10 | 0.62 |
| 12 | 0.89 |
| 16 | 1.58 |
| 20 | 2.47 |
| 25 | 3.85 |
| 32 | 6.31 |
| 40 | 9.86 |
| 50 | 15.4 |
| 60 | 22.2 |
| 75 | 34.7 |
| 100 | 61.6 |
Key Information About MS Bright Bar Weight
Weight Calculation FormulaThe weight of an MS Bright Bar can be calculated using the following formula:Weight (kg/m) = 0.0062 × (Diameter in mm)²Factors Affecting Weight
- Diameter: The weight increases exponentially with the diameter of the bar.
- Length: The total weight is directly proportional to the length of the bar.
- Material Density: MS Bright Bars are typically made of mild steel with a density of approximately 7850 kg/m³.
ApplicationsMS Bright Bars are widely used in construction, manufacturing, and various industries due to their:
- Corrosion resistance
- Strength and durability
- Cost-effectiveness
- Versatility in shaping and machining
Types of MS Bars
- Hot-Rolled: Produced at high temperatures, offering excellent malleability and strength.
- Cold-Rolled: Manufactured at room temperature, providing an attractive surface finish.
- Forged: Combines qualities of both hot-rolled and cold-rolled bars.
Importance of Weight CalculationsAccurate weight calculations are crucial for:
- Material planning
- Cost estimation
- Structural load calculations
- Transportation and handling considerations
By using the provided weight table and calculation formula, you can easily determine the weight of MS Bright Bars for your specific project requirements.