Epoxy Floor Coverage Calculator
Here's a comprehensive table summarizing key information about epoxy floor coverage:
| Specification / Factor | Details |
|---|---|
| Coverage Area per Gallon at 1/8" | 125 - 160 sq. ft. |
| Coverage Area per Gallon at 3/16" | 80 - 100 sq. ft. |
| Typical Thickness Range | Varies (100 - 1000 microns) |
| Compressive Strength | 11,000 psi filled, 8,000 psi unfilled1 |
| Flexural Strength | 4,400 psi filled, 9,400 psi unfilled1 |
| Tensile Strength | 6,000 psi unfilled, 2,400 psi filled1 |
| Factors Affecting Lifespan | Type of Traffic, Thickness, Preparation2 |
| Epoxy Mixing Ratio | 1:1 (resin to hardener) |
| Coverage for Seal Coat | Approximately 48 sq. ft. per gallon3 |
| Coverage for Flood Coat | Approximately 16 sq. ft. per gallon at 1/8"3 |
| UV Resistance | Susceptible to UV damage, may require UV-resistant topcoat5 |
| Recommended Thickness for Light Duty | Up to 150 microns4 |
| Recommended Thickness for Medium Duty | 300 to 1000 microns4 |
| Recommended Thickness for Heavy Duty | > 4 mm4 |
| Estimated Coverage (Thin Application) | 300-500 sq. ft. per gallon6 |
| Estimated Amount for 1-Car Garage | 2 gallons for two coats after primer6 |
| Estimated Amount for 2-Car Garage | 3 gallons6 |
| Estimated Amount for 3-Car Garage | 5 gallons6 |
This table provides a comprehensive overview of epoxy floor coverage, including application rates, strength characteristics, factors affecting lifespan, and recommended thicknesses for various levels of use. It's important to note that actual coverage may vary depending on the specific product used, surface conditions, and application method.