Double Cabinet Door Size Calculator
Here’s a comprehensive table for Double Cabinet Door Sizing, covering essential dimensions, standard gaps, and guidelines for properly measuring and installing double cabinet doors.
| Measurement Type | Standard Dimension/Formula | Description & Use |
|---|---|---|
| Door Width (each) | (Opening width / 2) – gap | Divide the cabinet opening width by two and subtract a small gap to get the width for each door. |
| Door Height | Opening height – (2 × gap) | The door height is typically the full cabinet opening height, minus a small gap at the top and bottom. |
| Gap Between Doors | 1/8 inch (3 mm) | Standard gap between double doors to prevent binding and ensure smooth operation when opening or closing. |
| Side Gap Clearance | 1/16–1/8 inch (1.5–3 mm) | A slight gap on each side of the cabinet frame to avoid scraping, allowing room for adjustments. |
| Top/Bottom Clearance | 1/8 inch (3 mm) | Clearance at the top and bottom to prevent binding and account for slight cabinet shifts or expansions. |
| Overlay Amount | 1/2 to 3/4 inch (if applicable) | If using overlay doors, the doors should overlap the frame by 1/2 to 3/4 inch on each side for full coverage. |
| Inset Door Adjustments | Inset inside cabinet opening, allow 1/16–1/8 inch gap | Inset doors fit within the cabinet opening, requiring consistent gaps around each edge for a seamless fit. |
| Handle Height | 2–4 inches from the top or bottom edge | Handles are typically positioned within 2–4 inches from the top or bottom edge for comfortable access. |
| Hinge Type | Concealed or surface-mounted hinges | Choose hinges that match the door style: concealed hinges for a clean look, or surface-mounted for visibility. |
| Hinge Placement | 3–4 inches from top and bottom edges | For stability, place hinges 3–4 inches from the top and bottom of each door, with additional hinges as needed. |
| Overlay vs. Inset Doors | Overlay covers frame edges; inset sits inside opening | Overlay doors cover the cabinet frame edges, while inset doors sit flush within the opening. |
| Door Thickness | 1/2 to 3/4 inch (standard) | Typical cabinet doors are 1/2 to 3/4 inch thick, providing stability and compatibility with standard hinges. |
Key Considerations for Double Cabinet Door Sizing
- Door Width and Height: To determine the width of each door, divide the cabinet opening width by two, then subtract the standard gap. For door height, measure the full opening height and subtract gaps at both the top and bottom.
- Gaps and Clearances: Ensure there’s a 1/8-inch gap between the two doors and additional side and top/bottom clearances. This avoids door binding and ensures smooth operation, especially with seasonal humidity changes.
- Overlay vs. Inset Doors: Overlay doors cover the edges of the cabinet frame and are typically used with face-frame cabinets. Inset doors fit within the cabinet opening and require precise gaps on all sides for a flush look.
- Hinge Type and Placement: Concealed hinges offer a modern look, hiding the hardware, while surface-mounted hinges are more visible. For each door, place hinges 3–4 inches from the top and bottom, with additional hinges for taller doors.
- Door Thickness: Most cabinet doors are 1/2 to 3/4 inches thick. This range provides sufficient strength and allows for compatibility with a wide range of hinges and mounting styles.
This table provides all the necessary information to measure and install double cabinet doors, ensuring precise fit and smooth operation.