Epoxy Volume Calculator
Here’s a comprehensive table detailing all you need to know about the volume of epoxy resin:
| Aspect | Details |
|---|---|
| Mixing Ratio | Typically 1:1 or 2:1 (resin to hardener), but varies by product1 |
| Coverage | Approximately 1.6 m² per liter at 1 mm thickness1 |
| Density | About 1.16 g/cm³ for most epoxy resins1 |
| Shrinkage | Low shrinkage during curing (typically <2%)14 |
| Pot Life | Varies by product, usually 20-40 minutes2 |
| Cure Time | 24-72 hours for full cure, depending on formulation2 |
| Viscosity | 12,000 – 13,000 cP for standard epoxy resins1 |
| Minimum Pour Depth | Usually 1/8 inch (3.175 mm)3 |
| Maximum Pour Depth | Varies by product, typically 1/4 to 2 inches (6.35 to 50.8 mm)3 |
| Bubble Formation | Common during mixing and curing, can be minimized with proper techniques2 |
| Temperature Sensitivity | Curing process affected by ambient temperature; ideal range 70-80°F (21-27°C)2 |
| Expansion/Contraction | Minimal thermal expansion/contraction after curing4 |
| Volume Calculation | Area (length x width) x desired thickness = volume needed3 |
| Overflow Allowance | Add 10-15% extra to account for spillage and uneven surfaces3 |
| Layering | Multiple thin layers often preferred over one thick layer3 |
| Filler Compatibility | Can be mixed with various fillers to alter properties or reduce volume4 |
This table provides a comprehensive overview of the key factors related to epoxy resin volume. It’s important to note that specific values may vary depending on the exact product and manufacturer. Always consult the product’s technical data sheet for precise information and follow the manufacturer’s instructions for best results