Cavalry Slider Pocket Door Size Calculator
Here’s a comprehensive table for Cavalry Slider Pocket Door Sizes, covering essential dimensions and considerations for a typical pocket door system.
| Measurement Type | Standard Dimension | Description & Use |
|---|---|---|
| Door Width | Typically half the opening width (e.g., 36 inches for a 72-inch opening) | The width of the actual door panel; should allow for smooth sliding within the pocket. |
| Door Height | Opening height minus 1 inch (e.g., 79 inches for an 80-inch opening) | Allows clearance for smooth operation and avoids floor contact. |
| Pocket Width | Opening width + 2 x door thickness (e.g., 72 inches + 2 x 1.75 inches) | Total wall space required to house the door within the pocket, including clearance for smooth operation. |
| Door Thickness | 1.75 inches (standard) | Standard thickness for sturdy pocket doors; thicker doors may require reinforced walls. |
| Pocket Depth | Width of the door + 1 inch | The minimum depth required within the wall cavity to fully accommodate the door when it’s open. |
| Rough Opening Width | Door width x 2 + clearance | Rough opening should be twice the door width with additional clearance for framing and pocket accommodation. |
| Rough Opening Height | Door height + 2 inches | Ensures proper fit with allowance for framing and adjustments. |
| Clearance from Floor | 0.5–1 inch | Prevents scraping or resistance from flooring; essential for carpeted or uneven floors. |
| Pocket Door Frame Width | Pocket width + 1–2 inches | Adds stability and prevents door rubbing against the pocket interior. |
| Track Length | 2 x Door Width | Allows full extension of the door when opened, matching the pocket and door requirements. |
| Recommended Wall Thickness | 2 x Door Thickness (minimum) | Ensures that the wall can accommodate the pocket door system without compromising structural stability. |
| Headroom for Installation | 2–3 inches above the door height | Provides space for installing the sliding track, rail, and door adjustment. |
Key Considerations for Cavalry Slider Pocket Doors
- Door Width and Height: Typically, the door should be half the width of the overall opening for a single pocket door system, with a slight height reduction for clearance.
- Pocket Width and Depth: The pocket needs to accommodate the door thickness with an extra inch for smooth sliding. For thicker doors, ensure the wall has sufficient depth to hold the pocket.
- Rough Opening: The rough opening must be larger than the door itself, allowing space for framing and pocket installation.
- Floor Clearance: Maintaining 0.5–1 inch of clearance from the floor is crucial, especially if floors are uneven or carpeted.
- Track and Headroom Requirements: For effective installation, the track length should match twice the door width, with additional headroom for track mounting and adjustments.
- Wall Thickness: Thicker walls are needed to house the pocket without structural compromise, especially with heavy or double-thick doors.
This table provides all the essential information for determining and installing a Cavalry Slider Pocket Door, ensuring smooth operation and compatibility with standard door frames and wall structures.